IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 6    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 6,June 2012
Torque Analysis of Perpendicular Magnetic Gear with High Gear Ratio
Full Text(PDF, )  PP.176-179  
Prof.G.Muruganandam, Dr.K.S.Jayakumar, Mr.Hariharan.S, Mr.Joshua.E
High torque, Magnetic gear, Analytical modelling, Finite element analysis, Perpendicular Gear, NdFeB, Gear Ratio
This paper presents design and analysis of torque and flux density in perpendicular magnetic gear with different magnetic materials, dimensions and air gap. The results were compared to each other. This type of gear offers both high gear ratio and high torque. Moreover the low speed side is connected to prime mover and high speed side is connected to load after analysis, which is suitable for wind power, industrial (Group Drives) applications etc. Finally, it is concluded that the result in this paper may help to initiate a shift from mechanical gears to magnetic gears. (Selection of magnetic gear for suitable applications).
[1] Y. D. Yao, D. R. Huang, C. C. Hsieh, D. Y. Chiang, S. J. Wang, andT. IF. Ying, “The Radial Magnetic Coupling Studies of Perpendicular Magnetic Gears,” IEEE Trans. Magn., vol 32, no.5, pp.5061- 5063, September 1996.

[2] Peter Omand Rasmussen, Torben Ole Andersen, Frank T. Jorgensen, and Orla Nielsen, “Development of a HighPerformance Magnetic Gear,” IEEE Trans. Ind. Appli., vol. 41, no. 3, pp.764-770, May/June 2005.

[3] K. T. Chau, Dong Zhang, J. Z. Jiang, Chunhua Liu, and Yuejin Zhang, “Design of a Magnetic-Geared Outer-Rotor PermanentMagnet Brushless Motor for Electric Vehicles,” IEEE Trans. Magn. Vol. 43, no. 6, pp.2504-2506, June 2007.

[4] Frank T. Jorgensen, Torben Ole Andersen, and Peter Omand Rasmussen, “The Cycloid Permanent Magnetic Gear,” IEEE Trans. Ind. Appli., vol 44, no. 6, pp.1659-1665, November/December 2008.

[5] Linni Jian, Student Member, IEEE, K. T. Chau, Senior Member, IEEE, and J. Z. Jiang,“A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation,” IEEE Trans. Ind. Appli., vol. 45, no. 3, pp. 954-962, May/June 2009.

[6] Linni Jian, K. T. Chau, Yu Gong, J. Z. Jiang, Chuang Yu, and Wenlong Li, “Comparison of Coaxial Magnetic Gears With Different Topologies,” IEEE Trans. Magn., vol. 45, no. 10, pp. 4526-4529, October 2009.

[7] L. L. Wang, J. X. Shen, P. C. K. Luk_, W. Z. Fei_, C. F. Wang, and H. Hao, “Development of a Magnetic-Geared PermanentMagnet Brushless Motor,” IEEE Trans. Magn., vol. 45, no. 10, pp. 4578-4581, October 2009.

Untitled Page