IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 6    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 6,June 2012
Comb Line Notch Filter Design on Silicon Coplanar Transmission Line
Full Text(PDF, )  PP.42-46  
Buddhadev Pradhan, Bhaskar Gupta 
Comb line, notch filter, coplanar technology, CMOS technology, RF characterization.
A comb line notch filter is presented, in which two quarter wave length resonators are placed face to face on the signal line of a CPW. The CPW is designed on silicon substrate enabling compatibility with planar IC technology. The comb line notch filter rejection frequency is 12.75GHz, where the return loss -1.7dB and insertion loss is -3.8dB.This proposed structure is simulated using ANSOFT HFSS v13.
1. Vincze, A.D. ‘Practical design approach to microstrip combline filters’,IEEE Trans. Microw. Theory Tech., 1974, 22, pp. 1171–1181.

2. Brown, E.R.: “RF-MEMS switches for reconfigurable integrated Circuits”, IEEE Trans. Microw. Theory Tech., 1998, 46, pp. 1868–1880.

3 .Gabriel M. Rebeiz, ‚RF MEMS: Theory, Design, and Technology”, John Wiley & Sons Ltd, Chapters 1, 9 and 10, pp.1-20, 259-324, 2003.

4. YASUSHI HORII Faculty of Informatics, Kansai University 2-1-1 Ryozenji-cho, Takatsuki-shi, Osaka 569- 1095 Japan, TOSHIAKI KITAMURA, MASAHIRO GESHIRO, SHINNOSUKE SAWA Osaka Prefecture University 1-1 Gakuen-cho, Sakai-shi, Osaka 599-853 1 Japan . “MULTISTAGE DUAL-PLANE COMB-LINE FILTER EXCITED BY CONDUCTOR-BACKED COPLANAR WAVEGUIDE.”

5. Manuel Sánchez-Renedo, Roberto Gómez-García, Student Member, IEEE, José I. Alonso, Member, IEEE, and César Briso-Rodríguez “Tunable Combline Filter With Continuous Control of Center Frequency and Bandwidth.”

6. Isak Reines,Andrew Brown, Mohammed El-Tanani, Alex Grichener and Gabriel Rebeiz, ‚1.6-2.4 GHz RF MEMS 3- Pole Suspended Combline Filter”,University of California San DiegoLa Jolla, Ca 92121A. Brown Design 46055 Bloomcrest Dr. Northville, MI 48167.

7. K. Hirano, S. Nishimura, and S. K. Mitra, ‚Design of digital notch filters,” IEEE Trans. Circuits Syst., vol. CAS-21, pp. 540–546, July 1974.

8. I. C. Hunter et al., ‚Microwave filters—Applications and technology,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 3, pp. 794–805, Mar. 2002.

9. T. Ishizaki, T. Uwano, and H. Miyake, ‚An extended configuration of a stepped impedance comb-line filter,” IEICE Trans. Electron., vol. E79-C, no. 5, pp. 671–678, May 1996

10. M. Sagawa, M. Makimoto, and S. Yamashita, “Geometrical structures and fundamental characteristics of microwave stepped-impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 45, pp. 1078–1085, July 1997.

11. Tian-Hu Yu, S.K. Mitra and H. Babic, ‛Design of Linear Phase FIR Notch Filters‛, Sadhana, Vol. 15, Iss.3, pp. 133-55, Nov. 1990, India

12. S. J. Park, K. Y. Lee, and G. M. Rebeiz, ‚Low-loss 5.15– 5.70 GHz RF filter for wireless LAN applications,‛ IEEE Trans. Microw. Theory Tech., vol. 54, no. 11, pp. 3931–3939, Nov. 2006

Untitled Page