IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 11    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 11,November 2012
Effect of tool on tensile strength in single and double sided friction stir welding
Full Text(PDF, )  PP.221-226  
Author(s)
Sunny Mehra, Pardeep Dhanda, Ravinder Khanna,Narender Singh Goyat, Sanjeev Verma
KEYWORDS
AL19000H12, Join efficiency, Percentage elongation, Tensile strength, UTM.
ABSTRACT
In this experimental work, an extensive investigation had been carried out on AL 19000-H12 grade aluminum alloy plates. Plates of aluminum alloy (AL19000H12) size 200x50x6 mm were used for experiment. Material of weld tool used high carbon steel Diameter
References
[1] H.K.Mohanty, “Effect of tool shoulder and pin probe profile on friction stirred alluminium welds” journal of marine science and application ISSN :1002-2848/CN:61- 1400/f (2012) pp 200-207.

[2] L. John Baruch , R. Raju, V. Balasubramanian, “Effect of tool pin profile on microstructural and hardness of friction stir processed alluminium die casting alloy” European journal of scientific research ISSN:1450-216X Vol.70 No.3 (2012) pp-373-385

[3] M.Sarvghad Moghddam, R. Parvizi, M. Haddad-Sabzevar, A.Davoodi, “Microstructure and Mechanical properties of friction stir welded Cu 30 Zn brass alloy at various feed speed : influence of stir bend” Material and design 32 (2011) 2749- 2755.

[4] Olivier Lorrain, Véronique Favier, Hamid Zahrouni, Didier Lawrjaniec “Understanding the material flow path of friction stir welding process using unthreaded tools”. Journal of Materials Processing Technology vol. 210 pages: 603–609, 2010

[5] V. Balasubramanian, “Relationship between base metal properties and friction stir welding process parameters”, Materials Science and Engineering Journal A 480 (2008) pp 397–403

[6] K. Surekha, B.S. Murty, K. Prasad Rao, “Micro structural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy”, Journal of Surface & Coatings Technology 202 (2008) pp 4057–4068.

[7] Cui L., Hidetoshi Fujii, Nobuhiro Tsujib and Kiyoshi Nogi, “Friction stir welding of a high carbon steel”, Scripta Materialia 56 (2007) pp 637– 640.

[8] Dequing W., Shuhua L., Zhaoxia C., “Study of friction stir welding of aluminum”, Material Science and Engineering Journal 39 (2004) pp 1689-1693.

Untitled Page