IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 10    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 10,October 2012
Optimization of Cellular Layout under Dynamic Demand Environment by Simulated Annealing
Full Text(PDF, )  PP.91-97  
Author(s)
P.Dharmalingam, K.Kanthavel, R. Sathiyamoorthy, M.Sakthivel, R. Krishnaraj, C.Elango
KEYWORDS
Rank Order Clustering, Simulated Annealing algorithm, Dynamic demand environment, Cell Layout, Cellular Manufacturing. Group Technology, Static Layout, Optimum Layout.
ABSTRACT
Grouping the machines and parts in a cellular manufacturing system based on similarities is known as the cell formation. This paper proposes a method for design of cell layout for a manufacturing system under dynamic demand environment for automation batc
References
[1] Alan R. Mckendall Jr., Jin Shang, Saravanan Kuppusamy, (2006) “Simulated Annealing Heuristics For The Dynamic Facility Layout Problem” Computers & Operations Research 33, Page No. 2431–2444.

[2] Anan Mungwattana [2000], “Design of Cellular Manufacturing Systems for Dynamic and Uncertain Production Requirements with Presence of Routing Flexibility”. Virginia Polytechnic Institute and State University,Blacksburg, Virginia.

[3] Asif Iqbal (2010) “Balancing And Simulating Inter-Cell And Intra- Cell Moves Costs In A Cellular Manufacturing” Journal Of Studies On Manufacturing (/Iss.1) / Page No. 48-53.

[4] B. Ashtiani M. B. Aryanezhad B. Farhang Moghaddam, (2007) “Multi-Start Simulated Annealing For Dynamic Plant Layout Problem ” Journal Of Industrial Engineering International Islamic Azad University, South Tehran Branch , Vol. 3, No. 4, 44-50

[5] Bunglowala, A., Singhi, B.M. et. al, (2008), “Performance Evaluation and Comparison and Improvement of Standard Cell Placement in VLSI Design”, International Conference on Emerging Trends in Engineering and Technology.

[6] T.F. Burgess, (1996), “Modelling Quality-Cost Dynamics” International Journal Of Quality & Reliability Management, Vol. 13 No. 3, Page No. 8-26.

[7] Chang-Lin Yang & Shan-Ping Chuang & TsungShing Hsu, (2010) “A Genetic Algorithm For Dynamic Facility Planning In Job Shop Manufacturing” Springer-Verlag London Limited, Int J Adv Manuf Technol, DOI .10.100170/S00170- 010-2733-0

[8] Irappa Basappa Hunagunda And Madhusudanan Pillai Vb “Design Of Robust Machine Layout For Cellular Manufacturing Systems”, procedings of the International Conference on Digital factory Page No. 1398 - 1405

[9] Jamal Arkat, Mohammad Saidi &Babak Abbasi, (2006) “Applying Simulated Annealing To Cellular Manufacturing System Design” SpringerVerlag London Limited Int J Adv Manuf Technol, Page No. 531 -536.

[10] Jaydeep Balakrishnan,Chun Hung Cheng (2006), “A Note On “A Hybrid Genetic Algorithm For The Dynamic Plant Layout Problem” International Journal Of Production Economics, 103, 1, , Page No. 87-89.

[11] John E. Mitchell, (1999), “Branch-and-Cut Algorithms for Combinatorial Optimization Problems”. The Handbook of Applied Optimization, Oxford University.

[12] Kamran Shahanaghi , Seyed Ahmad Yazdian, (2009), “Analyzing The Effects Of Implementation Of Total Productive Maintenance (Tpm) In The Manufacturing Companies: A System Dynamics Approach” World Journal Of Modelling And Simulation Vol. 5 No. 2, Page No. 120-129.

[13]Maghsud Solimanpur & Shahram Saeedi & Iraj Mahdavi, (2010) “Solving Cell Formation Problem In Cellular Manufacturing Using Ant-ColonyBased Optimization” Springer-Verlag London Limited, Int J Adv Manuf Technol Page No.1135 - 1144.

[14] V. Madhusudanan Pillai, Bhavani Sankar Gudivada, (2005) National Institute Of Technology “A Simulated Annealing Algorithm For Linear Sequencing Of Machines For Layout Design” Sixth Int. Conf. On Opers. And Quant. Management, 9-11,

[15] Solimanpur, M., Jafari, A., (2008), Optimal solution for the two-dimensional facility layout problem using a branch-and-bound algorithm, Computers & Industrial Engineering, doi: 10.1016/j.cie.2008.01.018

[16] Soroush Saghafian, M. Reza Akbari Jokar, (2009) “Integrative Cell Formation And Layout Design In Cellular Manufacturing Systems” Journal Of Industrial And Systems Engineering Vol. 3, No. 2, Page No. 97-115.

[17] R. Tavakoli-Moghadam B. Javadi F. Jolai And S.M. Mirgorbani, (2006), “An Efficient Algorithm To Inter And Intra-Cell Layout Problems In Cellular Manufacturing Systems With Stochastic Demands” IJE Transactions a: Basics, Vol 19, Page No. 67-78.

[18]Tamal Ghosh, Sourav Sengupta , Manojit Chattopadhyay and Pranab K Dan, (2011), “Meta-Heuristics In Cellular Manufacturing: A State-Of-The-Art Review” International Journal Of Industrial Engineering Computations Page No. 2 87–122.

[19] Vladimir Modrak, (2009 ) “Case On Manufacturing Cell Formation Using Production Flow Analysis” World Academy Of Science, Engineering And Technology, Page No. 519 -523.

[20] Xiaodan Wu , Chao-Hsien Chu, Yunfeng Wang , Weili Y, (2007) , “A Genetic Algorithm For Cellular Manufacturing Design And Layout” European Journal Of Operational Research 181, Page No. 156–167.

[21] J.S.Yim, C.M.Kyung,(1998)_data path layout optimisation using genitic algorithm and simulated annealing, IEE Proc.-Comput. Digit. Tech., Vol. 145, No. 2,pp. 135-141

Untitled Page