IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 7    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 7,July 2012
Study of some parameters on drilling of Al based Metal Matrix Composites - a review
Full Text(PDF, )  PP.290-293  
Author(s)
S.Senthil babu, B K.Vinayagam
KEYWORDS
— Al-MMC, Composites, Drilling, Parameters.SiC
ABSTRACT
Composite material in general, and metal matrix composites in particular, have been a main topic in research for the last 15 years. Metal matrix composites (MMC) have been found to be useful in a number of engineering applications and particle reinforced aluminum MMCs have received considerable attention due to their excellent engineering properties like high strength to weight ratio, high toughness, high impact strength etc. But these materials are generally regarded as extremely difficult to machine, because of the abrasive characteristics of the reinforced particulates. It is also acknowledged that their machining behavior is not fully understood. The work reviewed here investigated the drilling parameters like feed rate, drilling tool and its geometry, cutting speed and other parameters like influence of coolants, heat treatment etc.
References
[1] Gul Tosun, Mehtap Muratoglu, “The drilling of an Al/SiCp metalmatrix composites, Part I: microstructure” in composites science and technology 64 (2004) 299 –308.

[2] J.Paulo Davim, C.A.Conceicao Antonio, “Optimal drilling of particulate metal matrix composites based on experimental and numerical procedures” in International journal of Machine tools and manufacture 41(2001) 21-31

[3] Edith morin, Jacques Masounave, E.E.Laufer, “Effect of drill wear on cutting forces in the drilling of metal-matrix composites” in Wear 184(1995) 11 –16.

[4] Gul Tosun, MehtapMuratoglu, “The drilling of an Al/SiCp metalmatrix composites, Part II: Work piece surface integrity” in composites science and technology 64 (2004) 1413 –1418.

[5] S.Basavarajappa, G.Chandramohan, J.Paulo davim, “Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques” in Journal of Material processing technology 196 (2008) 332- 338.

[6] M.Ramulu, P.N.Rao, H.Kao, “Drilling of (Al2O3)p/6061 metal matrix composites” in Journal of Material processing technology 124 (2002) 224-254.

[7] Stuart Barnes, Ian R. Pashby,“Through-Tool coolant drilling of Aluminium/SiC metal matrix composite” in ASME, vol 122, October 2000, 384-388.

[8] S.Basavarajappa, G.Chandramohan, J.Paulo davim, M.Prabu, K.Mukund, M.Ashwin, M.Prasannakumar, “Drilling of hybrid aluminium matrix composites” in International journal of Advanced Manufacturing Technology (2008) 35: 1244-1250.

[9] J.Paulo davim, ”Study of drilling metal – matrix composites based on the Taguchi techniques” in Journal of Materials processing technology 132 (2003) 250 –254.

[10] R.T.Coelho, S.Yamada, D.K.Aspinwall and L.H.Wise, “The application of Polycrystalline diamond (PCD) tool materials when drilling and reaming aluminium based alloys including MMC” in International journal of Mach. Tool Manufact. Vol 35, No.5,(1995) pp 761 –774.

[11] Tamer ozben, Erol kilickap, Orhan cakir, “Investigation of mechanical and machinability properties of SiC particle reinforced Al – MMC” in the journal of Materials processing technology 198 (2008) 220 –225.

Untitled Page