IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 1    
Website: http://www.ijser.org
scirp IJSER >> Volume 3,Issue 1,January 2012
Parametric influence on cutting parameters characteristics in precision machining of ceramic coating materials[
Full Text(PDF, )  PP.258-268  
Author(s)
Prof. Mohammed Yunus, Dr.J. Fazlur Rahman
KEYWORDS
— BearingArea Characteristics, Cutting force, Diamond and CBN grinding w heel, Grinding and Lapping, Optimizations of Cutting parameters, Precision Machining Processes Surface roughness.
ABSTRACT
Ceramic coated components have the advantage features of both metal and ceramics, i.e. good toughness, high hardness and wear resistance. Despite their outstanding characteristics, ceramic materials are not used in many cases due to high cost of machining. A major drawback to engineering applications of ceramic is due to their brittleness and fracture tough-ness, which makes them difficult and costly to machine.
References
[1] ] Erry Yulian T. Adesta, Muhammad Riza, Muataz Hazza,Delvis Agusman, Rosehan Tool Wear and Surface Finish Investigation in High Speed Turning Using Cermet Insert by Applying Negative Rake Angles European Journal of Scientific Research,Vol.38 (2), 2009, pp.180-188.

[2] Thamizhmanii S., Kamarudin K., Rahim E.A., Saparudin A., Hassan S., 2007. Tool Wear andSurface Roughness inn Turning AISI 8620 using Coated Ceramic Tool, Proceedings of The World Congress on Engineering Vol. II WCE, 2007, London, UK.

[3] Senthilkumar A., Rajadurai A., and Sornakumar A., 2003. Machinability of hardened steel using alumina based ceramic cutting tools, International Journal o Refractory Metals and HardMaterials, 21 pp. 109-117.

[4] Ms. Shruti Mehta, Mr. Avadhoot Rajurkar, Mr. Jignesh Chauhan, A Review on Current Research Trends in Die-Sinking Electrical Discharge Machining of Conductive Ceramics, International Journal of Recent Trends in Engineering, Vol. 1(5), 2009, pp.100-104.

[5] Yahong Liang and Sourin P Dutta, “Application trend in advanced ceramic technology”, Technovation 21(2001), pp. 61-65.

[6] R. A. Mahdavinejad, A. Mahdavinejad, “ED machining of WC-Co”, Journal of materials processing technology, 162-163, 2005, pp. 637-643.

[7] M. Wakuda, Y. Yamauchi and S. Kanzaki “Effect of work piece properties on machinability in abrasive jet machining of ceramic materials”, Publication: Precision Engineering, Volume 26 (2), 2002, pp. 193-198.

[8] H. Hocheng, K.R. Chang, Material Removal Analysis in Abrasive Water Jet cutting of Ceramic Plates, Journal of Material Processing Technology, Elsevier, Vol. 40, No. 5, 1994, pp.287-304.

[9] Konig W., Popp M., Precision Machining of Advanced Ceramics, Ceramic Bulletin, Vol.68 ( 3), 1989, pp.550-553.

[10] Dr.J.Fazlur Rahman and Mohammed Yunus,―Benefits of TBC Coatings on Engine applications‖, International conference, INCAM 2009 at Kalsalingam University, Tamil Nadu, India, March 2009.

[11] Dr.J.Fazlur Rahman and Mohammed Yunus, Mechanical and Tribological characteristics of Tungsten Carbide Cobalt HVOF coatings, International conference held at Anjuman college of Engineering, Bhatkal October 2008.

[12] Mohammed yunus, Dr.J. Fazlur rahman, Optimization of usage parameters of ceramic coatings in high temperature applications using Taguchi design, Int. J. of Engineering science and Tec Engineering Science and Technology, Vol.3(8), 2011, pp.193-198.

[13] Mohammed yunus, Dr.J. Fazlur rahman, An investigation towards characterization of thermally sprayed industrial coatings, Int. J. of Advanced Engineering Sciences and Technologies Vol.10( 2), 2011, pp.6364 – 6371.

[14] Mohammed yunus, Dr.J. Fazlur rahman, Optimization of process parameters of wear and hardness characterization of industrial ceramic coatings using Taguchi design approach , Int. J. of Advanced Engineering Sciences and Technologies, Vol.9(2), 2011, pp.193- 198.

[15] S. Gowri, K. Narayana, Precision Grinding of Sprayed Ceramic coatings, 7thAnnual Conference, ASPE, USA, october 1992.

[16] S. Gowri, K. Narayana, Study on Flat Lapping Characteristics of Plasma sprayed Ceramic Coatings, International Conference on surface Modification Technologies, Nagsaka, Japan, october 1993.

[17] Caveney, R.J., Theil N.W., Grinding Alumina with Dioamond Abrasive, NBS special publicationb,1972, pp. 99.

[18] Chen. C., Saki.S., InasakiI, Lapping advanced ceramics, Journal of Materials and Manufacturing processes, vol 6(2), pp.211-226.

[19] Davis. C.E., A study of theinfluence of flat Lapping with Diamond microabrasivraying, Diamond Information Series 1.32, De beersIndustrial diamond diviionU.K.

[20] Hon. K.K., Characteristics of force pattern in CBN grinding,1983, 24 th IMTDR confrenve pp.277-283.

[21] Krishnamurhy R, annachalam L.M.,GokulRatnam. C.V., Grinding Transformation of toughned Y-ZTP ceramics, Annals of CIRP, Vol40(1),1991, pp.331-337.

[22] Marshell, Shaw M.C., Forces in Dry Surface Grinding, ASME, pp. 51.

[23] Malkim S., Current Trend in CBN Technology, Annals of CIRP vol 34, 1985, Pp. 557-563.

Untitled Page