IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 6    
Website: http://www.ijser.org
scirp IJSER >> Volume 2, Issue 6, June 2011 Edition
Online Graphical Display of Blood Oxygen Saturation and Pulse Rate
Full Text(PDF, 3000)  PP.  
Author(s)
Dilpreet Kaur, Sukhwinder Kumar, Shashi Sharma
KEYWORDS
Heart rate, microcontroller, oxygen saturation, pulse oximeter
ABSTRACT
This paper will design a non-invasive pulse oximeter using the ADuC842 microcontroller. A pulse oximeter is a medical device that indirectly monitors the oxygen saturation of a patient's blood and heart rate. The hardware has been developed for the pulse oximeter and programming/coding has been done for calculating blood oxygen saturation and pulse rate of a patient. The results are displayed on the OLED or transported to PC. The software used is ASPIRE (Advanced Systems Programming Integrating Real-time Emulation) verion 1.05. Assessing a patient's need for oxygen is the most essential element to life; no human life thrives in the absence of oxygen.
References
[1] Cho Zin Myint, Nader Barsoum, Wong Kiing Ing, “Design a medicine device for blood oxygen concentration and heart beat rate”,Global Journal on Technology and Optimization, June 2010.

[2] Maziar Tavakoli, Student Member, IEEE; Lorenzo Turicchia, and Rahul Sarpeshkar, Senior Member, IEEE, “An Ultra-Low-Power Pulse Oximeter Implemented with an Energy-Efficient Transimpedance Amplifier”, IEEE transactions on Biomedical circuits and systems, VOL. 4, NO. 1, February 2010.

[3] Pawan K. Baheti, Harinath Garudadri, “An Ultra low power pulse oximeter sensor based on compressed sensing”, IEEE Computer Society, 2009.

[4] Susannah Fleming, Lionel Tarassenko, Matthew Thompson, and David Mant, “Non-invasive Measurement of Respiratory Rate in Children Using the Photoplethysmogram”, 30th Annual International IEEE EMBS Conference, August 2008.

[5] Stephan Reichelt_, Jens Fiala, Armin Werber, Katharina Förster, Claudia Heilmann, Rolf Klemm, and Hans Zappe, “Development of an Implantable Pulse Oximeter”, IEEE transactions on Biomedical Engineering, VOL. 55, NO. 2, February 2008.

[6] Guowei Di, Xiaoying Tang, Weifeng Liu, “A Reflectance Pulse Oximeter Design Using the MSP430OF149”, IEEE/ICME International Conference on Complex Medical Engineering, 2007.

[7] Hassan Deni, Diane M. Muratore, Robert A. Malkin, “Development of a Pulse Oximeter Analyzer for the Developing World”, IEEE, 2005.

[8] Panayiotis A. Kyriacou, Sarah Powell, Richard M. Langford, and Deric P. Jones, “Esophageal Pulse Oximetry Utilizing Reflectance Photoplethysmography”, IEEE transactions on Biomedical Engineering, VOL. 49, NO. 11, November 2002.

[9] Juan M. Lopera, Juan Diaz, Miguel J. Pneto and Fernando Nuno, “Pulse oximeter for homecare”, IEEE Proceedings of the Second Joint EMBSBMES Conference, October 2002.

Untitled Page