IJSER Home >> Journal >> IJSER
International Journal of Scientific and Engineering Research
ISSN Online 2229-5518
ISSN Print: 2229-5518 6    
Website: http://www.ijser.org
scirp IJSER >> Volume 2, Issue 6, June 2011 Edition
Computer Simulation of Forging Using The Slab Method Analysis
Full Text(PDF, 3000)  PP.  
Author(s)
S. B. Mehta, D. B. Gohil
KEYWORDS
analysis, simulation, modelling, forging, closed-die forging, open die forging, process.
ABSTRACT
Forging is a very complex process and the measurement of actual forces for real material is difficult and cumbersome. The main objective of this document is to use the analytical methods for measuring parameters such as load, and stress distribution of forging process and use them to make simple, reliable, fast and non-expensive simulation tools, contrary to the commercial software's which require much means, time and a perfect knowledge of the process. Of the various methods used for analysing forging operations, the most often used SLAB method techniques are described here.
References
[1] T. Gangopadhyay, D. Pratihar, I, Basak, Expert system to predict forging load and axial stress, Applies soft computing, Jan 6 2010

[2] T. Altan, G. Ngaile, G. Shen, Cold and hot forging: fundamentals and applications, ASME International, 2005

[3] F. Fereshteh-Saniee, M. Jaafari, Analytical, numerical and experimental analysis of the closed die forging, Journal of material processing technology, 125-126(2002) 334-340

[4] )J. Hou, A plane strain UBET analysis of material flow in a filled deep die cavity in closed die forging, Journals of material processing technology,70(1997) 103-110

[5] T. Altan, J. Fiorentino , Prediction of loads and stress in closed die forging, Transactions of the ASME , may 1971

[6] J. Hou, H. Keib, U. Stahlberg, Determination of boundary between dead metal region and deformation zone by the upper bound method, Internal report, Division of material forming, Royal institute of technology 1993

[7] T. Altan, G. Shen, G. Ngaile, Cold and hot forging: fundamentals and applications, ASME International 2005

[8] Kobayashi, S., Oh, S.I., Altan, T., Metal Forming and the Finite Element Method, Oxford University Press, 1989.

[9] Nefissi N, Bouaziz Z, Zghal A, Prediction and simulation of Axisymetric forging load of aluminium , APEM journal, 2008

[10] B Tomov, Hot closed die forging-State-of-art and future development, AMME Journal, September 2007

[11] T Suzuki, Recent developments of forging in japan, International journal of machine tools manufacturing, vol 29, No. 1,pp 5-27 1989

Untitled Page