International Journal of Scientific & Engineering Research, Volume 3, Issue 11, November-2012 1

ISSN 2229-5518

Any Charger Any Battery Any Mobile

Shyam Sunder

MSC Biotechnology

E-mail Id:- shyam_4121@yahoo.com

ABSTRACT- There are lot of mobile phones and mobile batteries in the world. Main problem often faced by mobile phone customer is that how to charge mobile phone when he forget the specific charger of the phone or charging pins of mobile phone is not working? There are two options available for him.

1. Get the specific mobile charger.
2. Use multiple pin charger.
Now we had solved the problem.
We had modified the charging process mobile customer can charge the battery with any charger with this innovative process.

====================================================================================

INTRODUCTION

harging is the process in which potential difference of the two terminal of battery is increased so as to ensure the flow of current. In mobile phones same process is occurring but
current is not directly delivered to battery it is delivered through
phone.
Now question arises how we charge battery with any charger? We can perform this process directly or indirectly but in this process we had modified this process and using direct way to charge the battery.

2.EXPERIMENT-We had performed the experiment. The procedure of the experiment is as follows.

A. First of all arrange any mobile charger and a mobile phone. B.Now take the mobile charger and remove its charging pin and

expose the metal wires.
C.Now insert these wires in the charging pins of mobile phone in such a way that postive terminal wire of charger attach to the negative terminal of phone and vice versa. You can check the postive or negative terminal by checking markings of signs on the battery.

d.Now put the mobile battery in the phone if you had attached the wires correctly the charger bulb will glow as you insert the battery.

International Journal of Scientific & Engineering Research, Volume 3, Issue 11, November-2012 2

ISSN 2229-5518

e.After this insert charger plug in the electricity plug there will be small glow in the light of charger . This will shows that charging process had started.
f. After half an hour you can check the charging process by touching the charger head it will show heat signature.
g. As the charging process will be completed the charger head will start cooling to its normal temperature due to increased potential difference of battery.
h.Now you can remove the wires and can use the mobile phone.

3.PROS AND CONS

a.You can charge any battery with any charger. b.Charging process is very fast.
c.It is very cheap and easily available.
d.No need to change the damaged pins of mobile phone.

CONS-

a.Without understanding the procedure you cannot charge your battery.

4.CONCULSION-

By modifying the process of utilization of resources we can save money as well as time.

5. Reference:-

Shyam Sunder Vill. Baloh, P.O. Panyali, Teh. Nadaun, Distt. Hamirpur H.P. Country INDIA
Pin- 177040 email:- shyam_4121@yahoo.com